- High roundness grade 300 balls in a shop dispenser bottle - 1/4"--250/bottle - 1/8"--500/bottle - 3/16"--500/bottle - 5/16"--250/bottle - 5/32"--500/bottle - 7/32"--500/bottle
M7 Shaft/M6 Head 48mm Long
• Designed to keep dust and dirt out of V-Brake cable/housing systems
Strain relief for servicing RockShox Reverb hydraulic lines. - Fits all generations of Reverb
- Replacement retainer bearings for an assortment of applications
• Fits all Trek kids' bikes • Super-strong steel derailleur guard
A new stet of post keys for your RockShox Reverb tightens up any rotational slop that may develop normally with use. - Fits all generations of Reverb and Reverb Stealth - Brass Key sizes are defined by the number of lines on the key. (Zero lines means a "Size 0" key, 3 lines means a "Size 3" key.)…
The Problem Solvers Cantilever Studs screw into the bosses built into bicycle frames to provide the proper mounting studs for brakes. Each brake requires two studs.
Dirty, worn, or damaged Foam Ring Filters can lead to premature wear and damage to your Reverb's internals. Keep that post dropping smoothly and reliably by replacing foam rings at regular service intervals. - Fits all generations of Reverb - Keeps lubrication on the inner shaft assembly
The Problem Solvers Brake Boss Plugs are perfect for when you've removed your cantilever or linear-pull brakes in order to run disc brakes or a fixie setup. These plugs thread into the empty frame bosses and lend a clean look, while also protecting the threads inside the frame from corrosion.
Problem Solvers' 8mm Hex Crank Arm Fixing Bolt & Cap replace the old bolts for your crank. Uses an 8mm hex wrench.
Use these to shim All-City's cross levers down from 31.8mm to 26.0mm. - Adapts down to fit 26.0mm road, cross, or drop bars - For use with All-City Cross Levers with 31.8mm bar clamp - Sold as a pair
• For use with externally routed road frames
The Problem Solvers Cassette Spacers are made of light and durable anodized aluminum and come in different thicknesses for correctly spacing various brand and model cassette cogs. Measure and match your spacers to choose the right width.
- Super light carbon spacers for tuning stem height - Spacers are internally weight relieved to drop a few extra grams
The Problem Solvers Steerer Tube Shims are for installing 1-1/8-inch diameter threadless stems on 1-inch diameter threadless forks. The shim is made of light, durable anodized aluminum and is chamfered on the ends for easy stem installation.
Replacement Remote-end Hose Barb for RockShox Reverb dropper seatposts. - Fits all generations of Reverb
- Enables Double Barrel springs (1.43" ID x 2.10-2.19 OD) to be run on other brand shocks
Key features: - Adapter to fit Bontrager Race Lite Ergo Bar Ends to Bontrager Satellite Plus IsoZone Handlebars - Only compatible with the Bontrager Satellite Plus IsoZone Handlebar - For most other bar ends, use: Bontrager Satellite Plus IsoZone Bar End Adapter
Dimension Seatpost Binder Bolts - 16g
- Lower cables for Odyssey's Gyro G3 (sold separately). - Universal fit. - Lower cables only.
- Upper cables for Odyssey's Gyro G3 (sold separately) - Universal fit. - Upper cables only.
Problem Solvers' 11-speed Freehub Spacer converts your 11-speed freehub body to accept a 10-speed casssette. Use this spacer if you are running a 10-speed drivetrain on a new set of wheels with a 11-speed freehub body. The spacer is 1.85mmm thick.
- Durable OEM quality - Cutting guides
- Protective neoprene and velcro cut-To-Fit boot fits most rear shocks
- New ultra-slim 2014-T6 aluminum seat clamp with replaceable hardware and self-aligning nut. - 6061-T6 aluminum construction. - Standard 1-1/8-inch size.
The Problem Solvers Seatpost Shim is what you need when your seatpost is a little too small-diameter to fit tightly into your frame. It's made of light, durable aluminum and has a lip on the top so it won't slide down inside the frame during installation.
RockShox Reverb Hose Parts
- Microspacers ensure the correct fitment of integrated headsets - Use between the top cover and the compression ring to ensure the top cover does not contact the headtube - Sold in bags of 10
Replace old brake barrel adjusters with a fresh pair of Problem Solvers' 10mm Brake Barrel Adjuster. Designed for use with standard brake cables.